LCD (Liquid Crystal Display)
The display shows selected operating conditions, as
indicated on page 11.
Microphone
To transmit, speak into the mic opening in a normal
voice level, while pressing the PTT switch.
Cursor Keys and ENT Key
The cursor keys [ ◄ ] and [ ► ] are used to select an
item displayed on the LCD.
Press the ENT key to determine the selection or
entered values.
Control Keys
Press the MENU key to display the MENU screen.
Press the BACK key to return the display to the
previous screen.
Press the SAVE key to store the current channel
information to the memory.
Press and hold the lock key [
lock feature. Controls and keys will be disabled.
Press and hold again to disable the lock feature.
COMM Key
Press this key to enter the COMM mode instantly.
Numeric Keypad
The keypad is used when setting frequencies.
8
C
& C
ontrols
onneCtors
] to enable the
( f
p
ront
anel
121.5 Key
Press and hold this key to access the emergency
frequency (121.5 MHz) instantly.
Loudspeaker
The internal speaker is located in this position.
FTA-450L O
)
M
perATing
AnuAL