Philips RQ1052 Owner's Manual page 12

English
14
3 Pull at the top of the lid (1) and remove it (2).
4 First insert the top of the shaver into the
Power Pod (1) and then press the bottom part
into the Power Pod (2).
Note: The shaver cannot be placed in the Power Pod
when the protection cap is on the shaving unit.
, The display shows that the shaver is charging
(see chapter 'The display').
Charging in the charger
1 Put the small plug in the charger.
2 Put the adapter in the wall socket.
3 Place the shaver in the charger. Press the
shaver tightly into the holder to lock into place.
Note: RQ1090 only: If the shaver is placed correctly,
you hear a beep.
, The display shows that the shaver is charging
(see chapter 'The display').
Using the shaver
shaving
1 Press the on/off button once to switch on the
shaver.
, The display lights up for a few seconds.