Table of Contents
Advertisement
NLRinse System
The stated consumption values are
laboratory measured values which
are determined according to the
currently valid standard and on the
basis of the Eco 50° program and the
factory-set water hardness value of 13
- 16 °dH.
G
lance flushing system
s
You can use dishes and glasses with
wash off without a hitch using the
rinse system and rinse aid.
rinse aid
For optimal drying results it is best
to use the rinse aid.
Only use rinse aid for household
dishwashers.
Filling rinse aid
If the rinse aid refill indicator lights up,
add rinse aid. Only use rinse aid for
household dishwashers.
Press and lift the tab on the lid of
1.
the rinse aid reservoir .
The rinse aid
2.
barrier max refill
28
2
1
share to the mar-
n.
If rinse aid has spilled over, it must
3.
be removed from the rinse aid
container.
Rinse aid spilled over can cause
excessive foaming during the wash
cycle.
Close the lid of the rinse aid
4.
reservoir.
aThe lid audibly clicks into place.
Set the rinse aid amount
If streaks or water spots remain on the
dishes, adjust the amount of rinse aid.
Press.
1.
Approx. 3 seconds on
2.
to access the basic settings.
aThe display shows Hxx. aThe
display shows
to give.
Just as often on
3.
until the display shows the factory
set value r05.
Just as often on
4.
the desired amount of rinse aid
has been set.
– A low setting adds less rinse aid
during the wash cycle, reducing
the streaks on the dishes.
max
Busy-
reflected
to press
press until
Advertisement
Table of Contents
