V for the first use
s set the options for the first use.
First time use
When using the device for the first
time or resetting it to factory
settings, you need to make settings.
Tip:Connect your device to a mobile
end device. You can make all settings
conveniently via the Home Connect
app.
→ †Quick start with Home Connect",
page 39
Condition: "The device is set up and
connected." → Page 14
Fill with softening salt."
1. "
→ Page 26
Fill with rinse aid."
2. "
→ Page 28
Overview of the water hardness settings
Here you will find an overview of the adjustable water hardness values.
You can request the water hardness from your local water company or determine it
with a water hardness tester.
Water hardness °dH
0 - 6
7 - 8
9 - 10
11 - 12
13 - 16
17 - 21
22 - 30
31 - 50
Hardness Range
soft
soft
average
average
average
hard
hard
hard
Before first useNL
Enable device."
3. "
→ Page 34
Set water softening."
4. "
→ Page 26
Set the amount of rinse aid." →
5. "
Page 28
Tip:You can change these settings
and other "basic settings" → Page 37
change at any time.
Softening System
Hard, calcareous water leaves
limescale residues on the dishes and
the rinse aid container and can clog
parts of the appliance. For good
washing results, you can soften water
with the water softener and softening
salt. To prevent damage to the device,
water with a hardness of more than 7
°dH must be softened.
mmol/l
0 - 1.1
1.2 - 1.4
1.5 - 1.8
1.9 - 2.1
2.2 - 2.9
3.0 - 3.7
3.8 - 5.4
5.5 - 8.9
Set value
H00
H01
H02
H03
H04
H05
H06
H07
25