Table of Contents
Advertisement
28
Installation
Motherboard
• After inserting the flat cable to the end of the receptacle on the
motherboard, push down on the locks on both sides of the
receptacle to secure.
• Pass the harness through the ferrite core.
Note
A PDW-F70 product of serial number of 11001 or higher, or the
PDW-F75 has no ferrite core.
5
For the PDW-F75 only, affix the PDDL label 1 over the
Professional Disc logo, and the Model label 2 over the "PDW-
F70" Model name so as to cover the original inscription as shown
in the figure below.
Main unit
Advertisement
Chapters
Table of Contents
