CONFIGURING Wi-Fi ACCESS POINT PROPERTIES
To configure the connection:
1.
On the bottom of the Access Point's specific Enable Settings
page, click Settings
2.
Verify the following information:
General
•
Status - displays the connection status of the network.
Status
•
Network – displays the type of network connection.
Network
•
Connection Type - displays the type of connection
Connection Type
interface.
•
Physical Address - displays the physical address of the
Physical Address
network card used for the network.
http://support.verizon.com/router
Settings. The configuration page displays.
05 / CONFIGURING
ADVANCED SETTINGS
Enable Settings
|
©2022 Verizon. All Rights Reserved
113