Verizon ARC-XCI55AX User Manual page 10

• If you are a LTE Home Internet customer, Setup Mode is not
applicable and you can skip to section 1.2b Positioning Your
Router. In Operation Mode, you will see the LED indicator listed in
the chart.
• If you are a 5G Home Internet customer, Setup Mode will allow
you to find a location in your home with the best 5G Ultra
Wideband Coverage.
• The device will automatically go into Setup Mode on the first
power up or after a factory data reset.
• You can also manually initiate Setup Mode by holding the WPS
button for 2+ seconds, then release (the LED on the front will
blink white 3 times to indicate device is in Setup mode).
LED Indicator
Signal
5G Ultra
Wideband
Coverage
LTE Coverage
No signal
http://support.verizon.com/router
LTE Home
Internet
-NA-
White
Red
5G Home Internet
Setup Mode
White
Red
Red
| ©2022 Verizon. All Rights Reserved
01 / INTRODUCTION
10
Operation
Mode
White
White
Red