Monitoring Atm Activity - Paradyne Hotwire ATM Line Cards 8335 User Manual

Monitoring ATM Activity

8335-A2-GB20-70
Use the ATM Switch screens to display read-only system information about ATM
parameters, cross connections, and activity.
Procedure
To view the ATM Switch menu:
1. Follow this menu selection sequence:
Monitoring ATM Switch (B-E)
2. The ATM Switch menu appears. Select the submenu option as shown in
Table 4-3, Monitoring – ATM
Table 4-3. Monitoring – ATM Switch (1 of 7)
ATM Parameters Screen
Displays parameters selected for ATM.
rt-VBR and nrt-VBR CAC Percent Bandwidth Utilization – The values represent the
amount of oversubscription the Connection Admission Control algorithm allows for the
class of service.
Uncorrected HEC Count – If the number of HEC errors (0 to 1000) exceeds the selected
number within a 15-minute period, an SNMP trap is sent. If Uncorrected HEC Count is set
to Disable, no trap is ever sent.
OCD Event Count – If the number of OCD errors exceeds the selected number within a
15-minute period, an SNMP trap is sent. If OCD Event Count is set to Disable, no trap is
ever sent.
ATM Parameters Screen
Displays parameters selected for ATM.
Uncorrected HEC Count – If the number of HEC errors (0 to 1000) exceeds the selected
number within a 15-minute period, an SNMP trap is sent. If Uncorrected HEC Count is set
to Disable, no trap is ever sent.
February 2003
Switch, and press Enter.
Models 8335, 8365, and 8385
−
Model 8355
−
4. Monitoring
B-E-A
B-E-A
4-11