Saw Head, Dismantling (P4S And P5S); Dismantling The Saw Head (P4S And P5S) - Husqvarna 525P4S Workshop Manual

7.33 Dismantling the saw head (P4S
and P5S)
B
Dismantle the saw head from the tube and remove
the chain.
D
Loosen the screw (C).
Unscrew the screw (D) as much as required in
order to twist the saw head and detach it from the
C
tube.
A
Remove the nut (A) and lift off the cover.
Remove the chain (B) and bar.
Remove the nut and washer that fixates the spur
unto the saw head.
Remove all spur components (washer, hub,
bushing and ring) as well as the hub cap.
Remove the bar bolt (A), chain tensioner (B)
followed by the, the chain guide plate, and the oil
duct (C).
B
C
A
74
- English