Throttle, Assembling; Assembling The Throttle - Husqvarna 525P4S Workshop Manual

Safety equipment
Check that the throttle cable is fitted to the under-
side of the pin on the throttle trigger lock.

6.7 Assembling the throttle

Put all details in the left half of the handle. Make
sure that the spring is correct fitted. Make sure
E
that all cables is fitted in the handle and will not be
A
clamped.
Assemble the throttle trigger lock (A) and the anti B
vibration element (B).
Fit the spring (C) and the throttle lever. C
Fit the clamping sleeve (D).
B
F
Carefully put the handle together, make sure the
anti vibration element is not lost.
D
B
Fasten the 5 screws (E) that holding the handle in
place. Fasten the screw (F) holding the shaft.
27
English -