All Group Play/Program Play/Random Play - Panasonic SC-DT100 Operating Instructions Manual

All group play/Program play/Random play

[DVD-A] [CD] [VCD]
While stopped
Press [PLAY MODE] to select the play mode.
The mode changes as follows each time you press the button.
All group play ([DVD-A] only)
ALL GROUP
Normal play
(Original display)
After selecting the mode, follow the steps for the mode.
[DVD-A] If you select bonus groups, you will have to enter a 4-digit
password ( page 15).
All group play
To play all the groups in succession
All Group Playback
Press PLAY to start
Press [1] (PLAY).
Random play
To play tracks randomly
Random Playback
Choose a group or groups
All 1 2 3
SELECT
ENTER RETURN
0 Press PLAY to start
1
[DVD-A]
Press [2, 1] to select a group and
press [ENTER].
≥You can select more than one group.
2
Press [1] (PLAY).
Play now begins in random order.
To clear a group [DVD-A]
Press [2, 1] to select the group you want to clear, then press [ENTER].
Normal play
Play modes are canceled and the program is cleared when you:
–Turn the unit off.
–Open the disc tray or select another source.
Program play
PROGRAM
PGM
Random play
RANDOM
RND
e.g. [DVD-A] (three groups)
Program play
To play a maximum of 24 tracks in a programmed order
Choose a group and track, then press ENTER.
PLAY MODE
G
No T Time
1
SELECT
Total Time 0:00
0 Press PLAY to start
ENTER RETURN
[CD]
e.g.
CD P:00
PGM
Track No.
Program No.
1
[DVD-A]
Press the numbered buttons to select
a group.
2
Press the numbered buttons to select
a track.
≥Repeat steps 1 and 2 to program other tracks.
≥To select a track using the cursor buttons
Press [ENTER] and [3, 4] to select a group or track, then
press [ENTER] again to register the number.
All the tracks in the selected group are selected when you
select "ALL".
3
Press [1] (PLAY).
Play now begins in the programmed sequence.
When play is stopped and the program contents are shown on
the display, you can also do the following.
≥To add or change groups or tracks
Press [3, 4] to select an available item, then repeat steps 1 and 2.
≥To check program contents
Press [3, 4].
≥To move to the pages before or after the one shown
Press [6, 5].
≥To clear tracks
Press [CANCEL] to clear the last track in the program.
≥To clear a track
1. Select the item you want to clear.
2. Select "Clear" with [3, 4, 2, 1] and press [ENTER].
≥To clear the whole program
Select "Clear all" with [3, 4, 2, 1] and press [ENTER].
e.g. [DVD-A]
Play
Clear
Clear all
RQT6387
17