Table of Contents
Advertisement
KC42-PP.book 16 ページ ２００２年１２月１９日 木曜日 午後４時３６分
ª Access to the card
When the card is being accessed, the
flash/access indicator 1 and card
access indication 2 lights.
When the flash/access indicator 1 and
the card access indication 2 lights;
• Do not turn off the camera.
• Do not remove the battery or pull out the
card.
• Do not disconnect the DC cable when
using the AC adaptor.
The card and the card contents may be
destroyed and the camera may not
operate normally.
As there is a risk that the data on the
card may be damaged or erased due to
the electrical noise, static electricity or
the defects of camera/card, please back
up your data on your PC using USB
connection. (P77)
Preparation
ª SD Memory Card (supplied) and
The SD Memory Card and
MultiMediaCard are small, lightweight,
removable external cards. The SD
Memory Card is equipped with a write
protection switch that can inhibit writing
and formatting. (When the switch is
moved towards the [LOCK] side, it is not
possible to write or delete data on the
card and format it. When the switch is
unlocked, these functions become
available.)
SD Memory Card
• RP-SDH512 (512MB)
• RP-SDH256 (256MB)
• RP-SD128BJ (128MB)
2048
• RP-SD064B (64MB)
19
• RP-SD032B (32MB)
• RP-SD016B (16MB)
• RP-SD008B (8MB)
MultiMediaCard
• The reading/writing speed
of MultiMediaCards is
slower than SD cards.
When MultiMediaCards are
used, the performance of
certain features may be
slightly slower than advertised.
• After recording motion images using the
MultiMediaCard, the flash/access
indicator and the card access indication
may appear for a while, but this is not a
malfunction.
16
MultiMediaCard (optional)
Advertisement
Table of Contents
