Table of Contents
Advertisement
KC42-PP.book 12 ページ ２００２年１２月１９日 木曜日 午後４時３６分
Inserting the Battery
3,6
5
Preparation
[Preparation]
• Check that the power switch is set to [OFF]
and the lens is stored.
[Inserting the battery]
1,4
1
Slide the door to the direction of the
arrow to open the Memory Card/battery
door.
2
Insert the charged battery all the way
in, until it is locked 1.
3
Close the Memory Card/battery door.
[Removing the battery]
4
Slide the door in the direction of the
arrow to open the Memory Card/battery
door.
2
5
Slide the lock 1 in the direction of
the arrow to remove the battery.
6
Close the Memory Card/battery door.
• If you will not be using the camera for a long
time, remove the battery.
• When the fully charged battery is inserted in the
camera for more than 1 hour, the clock setting is
memorized by the camera for about 24 hours
even after the battery is removed. (The time may
be shorter if the battery is not charged
sufficiently)
When the clock setting is cancelled, please set
the date/time again. (P24)
• When the card is being accessed, do not remove
the battery.
• The battery supplied with this camera is
exclusively designed for this camera. Do not use
with any other equipment.
• When removing the battery, be careful not to
drop it.
CAUTION
Danger of explosion if battery is incorrectly
replaced. Replace only with the same or
equivalent type recommended by the
manufacturer. Dispose of used batteries
according to the manufacturer's
instructions.
12
Advertisement
Table of Contents
