Audio Recording Swap Function (Vtr2 Only) - Panasonic AJ-LT85P Operating Instructions Manual

AUDIO RECORDING SWAP FUNCTION
This function enables CH1 input, CH2 input or CH1/CH2 mix to be selected as the audio signals to be recorded on CH1 and
CH2 of VTR2.
It makes it possible to record signals from an external microphone, which has been connected to CH2, on CH1.
It is also useful for internal editing from VTR1 to VTR2.
! The signals to be recorded on CH1 can be selected by changing the setting of setup menu No. 713 (CH1
REC SEL).
• The level of the input channel signals can be adjusted using the recording level control.
When CH2 was selected on setup menu No. 713, use the CH2 recording level control for the adjustment.
• The level of the channel signals to be recorded can be monitored on the level meter.
Use the CH1 meter to check the signals to be recorded even when CH2 was selected on setup menu No. 713.
(However, use the CH2 meter to check the input signals with EXT CHECK.)
• When inserting the audio signals, select the channel on which the signals are to be recorded.
Select A1 (CH1) for insert recording even when CH2 has been selected on setup menu No. 713.
Setup menu No. 713
CH1
CH2
MIX
@ The signals to be recorded on CH2 can be selected by changing the setting of setup menu No. 714 (CH2
REC SEL).
• The level of the input channel signals can be adjusted using the recording level control.
When CH1 was selected on setup menu No. 714, use the CH1 recording level control for the adjustment.
• The level of the channel signals to be recorded can be monitored on the level meter.
Use the CH2 meter to check the signals to be recorded even when CH1 was selected on setup menu No. 714.
(However, use the CH1 meter to check the input signals with EXT CHECK.)
• When inserting the audio signals, select the channel on which the signals are to be recorded.
Select A2 (CH2) for insert recording even when CH1 has been selected on setup menu No. 714.
Setup menu No. 714
CH1
CH2
MIX
Audio signals to be
Recording level control
recorded on CH1
CH1 input audio signals
CH2 input audio signals
CH1 and CH2 mixed
audio signals
Audio signals to be
Recording level control
recorded on CH2
CH1 input audio signals
CH2 input audio signals
CH1 and CH2 mixed
audio signals
57
(VTR2 only)
Level meter
CH1
CH2
CH1/CH2
(mixing ratio variable)
Level meter
CH1
CH2
CH1/CH2
(mixing ratio variable)
Insert bit
CH1 A1
Insert bit
CH2 A2