Table of Contents
Advertisement
1.
In the REC mode, press [ ] (
[ ] (
)
2.
Use [ ] and [ ] to select the flash setting you
want and then press [SET].
3.
Press the shutter button to shoot.
NOTE
• If you are using the "Normal" Screen Layout setting (page
54), each press of [ ] (
available flash settings.
) once.
Flash Mode
) will cycle through the
IMPORTANT!
• When using flash, take
care that the flash window
is not blocked by your
fingers or the camera
strap.
• When the ISO sensitivity
setting is "Auto" (page
126), sensitivity is high
and there is increased
digital noise when flash is
used. Decreasing ISO sensitivity shortens the range of the
flash, but is also reduces digital noise.
77
Flash
SHOOTING A SNAPSHOT
Advertisement
Table of Contents
