Table of Contents
Advertisement
Viewing Camera Images on a TV
Use the procedure below to view snapshots and movies on a TV
screen.
• You need to use the USB cradle and the AV cable that comes
with the camera to connect to a TV.
1.
Connect the USB cradle to a TV.
VIDEO IN Jack (Yellow)
Video
Audio
TV
Yellow
White
AV Cable
2.
Turn off the camera and place it onto the USB
cradle.
3.
Turn on the TV and select its video input
mode.
If the TV has more than one video input, select the one
where the USB cradle is connected.
AUDIO IN Jacks (White)
[AV OUT] (AV output port)
4.
Press [
] to turn on the camera and enter the
PLAY mode.
Pressing [ON/OFF] or [
When the camera turns on in the PLAY mode, an image will
appear on the TV screen. The camera's monitor screen will
not turn on.
5.
Now you can perform the applicable operation
on the camera for the type of file you want to
play.
• At this point you could press the USB cradle's [PHOTO]
button to start a slideshow (page 150).
VIEWING SNAPSHOTS AND MOVIES
151
] will not turn on the camera.
Advertisement
Table of Contents
