Erasing Caller Information - Panasonic KX-TCD440AL Operating Instructions Manual

TCD440_445AL(E).book Page 18 Monday, May 24, 2004 1:17 PM
Telephone
Example:
*1 Shown when this call has already been
viewed or answered.
3
Press {C} or {s} to call back the
displayed party.
Note:
L When no calls have been received, the
display will show "NO ITEM".
Editing a caller's phone number
before calling back
1
Press {e} or {v} repeatedly to display
the desired entry, then press {>}.
2
Press {v} repeatedly to display "EDIT
CALL NO", then press {>}.
3
Press {<} or {>} to move the cursor to
the right of where you want to edit the
number.
4
Edit the phone number.
L To erase a digit, press {C/T}.
5
Press {C} or {s}.
Note:
L The edited phone number will not be
saved.

Erasing caller information

1
Press {e} or {v} repeatedly to display
the desired entry, then press {>}.
2
Press {v} repeatedly to display
"CLEAR", then press {>}.
L If you want to erase all caller
information, select "ALL CLEAR".
3
Press {v} repeatedly to display "YES",
then press {>}.
18
4
Press {ih}.
*1
Storing caller information into the
phonebook
1
Press {e} or {v} repeatedly to display
the desired entry, then press {>}.
2
Press {v} repeatedly to display "SAVE
TEL NO", then press {>}.
3
Press {j}.
4
Enter the party's name (9 characters
max.; see the character table on page
15).
5
Press {j}.
6
Press {ih}.