Setting The Time And Date; Wall Mounting - Panasonic KX-TCD440AL Operating Instructions Manual

TCD440_445AL(E).book Page 11 Monday, May 24, 2004 1:17 PM

Setting the time and date

Important:
L Confirm that the AC adaptor is connected.
L Ensure that w is not flashing.
1
Press {j}.
2
Press {v} repeatedly to display
"SETTING BS", then press {>}.
3
Press {*}.
4
Enter the current hour and minute by
selecting 2 digits for each (24-hour time
entry).
Example: 15:15
Press {1}{5} {1}{5}.
L If you make a mistake, press {C/T}.
Digits will be cleared from the right.
5
Press {>}.
L "SETTING BS" will be displayed.
6
Press {>}, then press {*} 2 times.
7
Enter the current day, month and year by
selecting 2 digits for each.
Example: 17 May, 2004
Press {1}{7} {0}{5} {0}{4}.
L If you make a mistake, press {C/T}.
Digits will be cleared from the right.
8
Press {>}.
L "SETTING BS" will be displayed.
9
Press {ih}.
Note:
L If a power failure occurs, set the time and
date again.

Wall mounting

Hooks Hook
Note:
L Make sure the screws are securely
fastened to the wall.
L Use the following wall template to position
the screws before drilling.
Preparation
8 cm
Screws
11