Panasonic EB-X70 Operating Instructions Manual page 126

Connect
If you are using a circuit switched connection:
Select Make New Connection.
Select Modem - (Panasonic X70 or Bluetooth
window).
Enter the phone number for your Internet Service Provider (ISP).
If you are using a GPRS connection:
Select Make New GPRS Connection (GPRS).
Select Modem - (Panasonic X70 or Bluetooth
window).
Enter the Access Point Name (APN) supplied by your GPRS network operator.
Note: With some Bluetooth
correct COM port for the Data Connection Assistant. To do this on your computer
select Start > Settings > Control Panel > Phone and modem options > Add >
COMn, where n is the Bluetooth
Setting your computer's dial up connection
From your web browser:
Select Start > Program > Panasonic Data Connection Assistant
Select the previously created data connection, then select the Connect option from the
File menu.
Enter your user name and password and select Connect.
Once connected you can:
Browse web sites using your computer's web browser software, e.g. Internet Explorer.
Send and receive e-mails using your e-mail software application.
Send and receive files to and from a server connected to the Internet using FTP
software.
Note: For further details see the Data Connection Assistant documentation.
Faxing from your computer via Bluetooth
You can use Bluetooth
without using any cables. Your phone acts as a fax modem. You can use it for sending
and receiving faxes.
Once it is set up, whenever you send a fax from your computer it will use Bluetooth
connect to the phone, then your phone will dial the fax number.
To send and receive faxes you must subscribe to your network operator's fax service.
This gives you a second number for receiving incoming faxes.
To set up your computer and phone you need to:
126
USB adaptors you may need to add a modem on the
®
COM port number.
®
to connect your computer (laptop, notepad or PC) to your phone
®
COM port from the Select a Device
®
COM port from the Select a Device
®
®
to
®