Panasonic EB-X70 Operating Instructions Manual page 125

Pair your computer with your phone.
Install the Data Connection Assistant software on your computer.
Set up a dial up connection on your computer to access the Internet via your phone.
Note: Installation instructions for your computer may vary depending on your
computer's operating system, web browser, Bluetooth
information please refer to the documentation on the CD-ROM, or to the
Panasonic website www.panasonicmobile.com/support/software.
Installing Bluetooth
If your computer does not have Bluetooth
Get a Bluetooth USB or PCMCIA adaptor.
®
Plug the Bluetooth
Install the software provided with the adaptor.
Pairing your computer with your phone
You need to Pair your phone with your computer. You can do this from the phone in the
same way as you Pair with a Bluetooth
page 122) or you can do it from the computer:
First you need to turn on Bluetooth
Select Menu > Connect > Bluetooth > On/Off > On.
The Bluetooth icon appears on the phone.
®
Then make the phone Discoverable:
Select Menu > Connect > Bluetooth > Make D'coverable > Start/Stop > Start.
On your computer, run your Bluetooth
Select Find Bluetooth
Your computer should Discover your phone.
On your computer select Pair, then enter the Passkey (any number from 1 to 16
digits).
On your phone enter the same Passkey then select
Installing the Data Connection Assistant software
The Data Connection Assistant software is supplied with your phone on the CD-ROM,
or it can be downloaded from www.panasonicmobile.com.
Follow the instructions provided to install the Data Connection Assistant.
Note: Select Other/Skip modem install for operation with Bluetooth
Once the Data Connection Assistant is installed you need to set up a connection to your
Bluetooth modem:
®
Select Start > Programs > Panasonic Data Connection Assistant > Data Connections.
on your computer
®
®
adaptor into your computer.
®
headset (see Discovering and pairing devices on
®
on the phone:
®
application.
®
Devices.
®
Adaptor, etc. For further
®
built in, you need to:
Ok.h
®
Connect
.
®
125