Fitting Grease Filters; Changing Odour Filter - Bosch DWB068G50I User Manual And Installation Instructiions

Hide thumbs Also See for DWB068G50I:
Table of Contents

Advertisement

en Cleaning and servicing
high level of grease removal. We re-
commend cleaning the grease filters
every two months.
WARNING
Risk of fire!
Fatty deposits in the grease filters
may catch fire.
Clean the grease filters regularly.
ATTENTION!
The grease filters may become dam-
aged if they are squeezed.
Do not squeeze the grease filters.
Note: When cleaning the grease filter
in the dishwasher, light discolouration
may occur. This discolouration has
no effect on the performance of the
metal grease filters.
Requirement: The grease filters have
been removed.
Observe the information regarding
1.
the cleaning agents.
Place the grease filters loosely into
2.
the dishwasher.
Do not clean heavily soiled grease
filters with utensils.
Use special grease solvent for
stubborn dirt. You can obtain
grease solvents from after-sales
service or the online shop.
Start the dishwasher.
3.
Select a temperature of no more
than 70 °C.
Allow the grease filters to drain.
4.
8.7 Fitting grease filters
ATTENTION!
Falling grease filters may damage the
hob below.
Grip below the grease filter with
one hand.
14
Insert the metal grease filter with
1.
the lock facing the front into the
underside of the appliance.
Make sure that the locks engage.
2.
8.8 Changing odour filter
Only in circulatingair mode.
Requirements
¡ The grease filters have been re-
moved.
¡ The filters must be serviced regu-
larly.
¡ The active carbon filters must be
replaced at least every 4 months.
Push back the fastening hooks.
1.
Remove the old odour filter.
2.
Insert the new odour filter and se-
3.
cure it in place using the fastening
hooks.
Fit the metal grease filters.
4.
Note: The active carbon filters cannot
be cleaned or reactivated.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dwb098g50iDwb068g60iDwb098g60iDib098g50iDib128g50i

Table of Contents