Table of Contents
Advertisement
Before Requesting Help
Problem
A beep sounds when
or
on the
base unit is pressed.
A beep sounds when
entering caller list or base
unit phonebook with
cordless handset.
The unit picks up the wrong
voice tag.
Answering System
Problem
The answering system is
on, but incoming messages
are not recorded.
You cannot operate the
answering system from a
touch tone phone.
You cannot operate the
answering system with the
unit.
While recording a greeting
message, the unit starts to
ring and stops recording.
During playback, the unit
starts to ring and stops
playback.
122
Possible cause
Another unit in use.
Another unit in use.
Similar voice tag exists.
Possible cause
The recording time is set
to "Greeting Only".
Memory is full (30
minutes or 64 messages).
Incorrect remote code
entered.
Tone are too short to
activate the unit.
The answering system is
off.
Someone is operating
the answering system
A call is being received.
A call is being received.
Solution
Wait for the other user to
complete the operation.
Wait for the other user to
complete the operation.
Record different voice
tag.
Solution
Select "1 Minute" or "No
Limit (see "Answering
System").
Erase some or all of the
messages.
Enter the correct remote
code.
Press each button firmly.
Turn on the answering
system.
Retry when other user
has finished operation.
Answer the call. Retry
recording after
conversation is finished.
Answer the call. Retry
playback after
conversation is finished.
Page
p.48
Page
p.101
p.105
p.107
p.110
p.100
p.110
Advertisement
Table of Contents
