Onkyo TX-8522 Instruction Manual page 29

TX- 85228222_En.book 29 ページ ２００６年５月４日 木曜日 午前１１時５１分
Listening to the Radio —Continued
Displaying Radio Text (RT)
When tuned to an RDS station that's broadcasting text
information, the text can be displayed.
1
Press the [RT/PTY/TP] button
once.
RT/PTY/TP
The RT information scrolls across the
display.
Notes:
• The message "Waiting" may appear while the receiver
waits for the RT information.
• If the message "No Text Data" appears on the display,
no RT information is available.
Finding Stations by Type (PTY)
TUNING DOWN/UP
You can search for radio stations by type.
1
Use the [FM] input selector
button.
2
Press the [RT/PTY/TP] button
twice.
RT/PTY/TP
The current program type appears on
the display.
3 Use the TUNING
[ DOWN]/[UP
select the type of program you
want.
See the table on page 28.
RT/PTY/TP
FM SCAN
RT/PTY/TP
] buttons to
4
To start the search, press
[SCAN].
SCAN
The receiver searches until it finds a
station of the type you specified, at
which point it stops briefly before
continuing with the search.
5
When a station you want to listen
to is found, press [SCAN].
SCAN
If no stations are found, the message
"Not Found" appears.
Listening to Traffic News (TP)
FM
RT/PTY/TP
You can search for stations that broadcast traffic news.
1 Use the [FM] input selector
button.
2 Press the [RT/PTY/TP] button
RT/PTY/TP
three times.
If the current radio station is
broadcasting TP (Traffic Program),
"[TP]" will appear on the display, and
traffic news will be heard as and when
it's broadcast. If "TP" without square
brackets appears, this means that the
station is not broadcasting TP.
3
To locate a station that is
broadcasting TP, press [SCAN].
SCAN
The receiver searches until it finds a
station that's broadcasting TP.
If no stations are found, the message
"Not Found" appears.
SCAN
29