Signal Output Timing Of Driving Mode Transition (Reference Design); Sequence To Change The Extract Position (Reference Design) - Panasonic MN34120PAJ Manual

Confidential
Until : Indefinite

1.7.8 Signal output timing of Driving Mode transition (Reference design)

When the driving mode is changed, please change the setting value of TG register after setting the TG reset
register to "L" and the mode is changed by returning the TG reset register to "H".
After writing the driving mode transition register, the driving mode update data is output from the VD one
after another
Driving Mode transition
VD
HD
LVDS BLK Data output
Internal-VD

1.7.9 Sequence to change the extract position (Reference design)

In the extract output mode (No.11
the register "Flag of mode change" and the extract position change register.
After writing the extract position change register, the extract position update data is output from the VD one
after another.
Extract position change
VD
HD
LVDS BLK Data output
Internal-VD
2015/10/01
Enactment Revision
Specifications
TG reset register
writing
register writing
Figure 1.7.8 Timing chart of Driving Mode transition
FULL SCAN 5 division output
Mode shift flag register
writing
register writing
Figure 1.7.9 Timing chart of changing the extract position
Blanking
), the extract position can be changed by writing
Blanking
Generalplus Technology Inc.
MN34120PAJ
Total Page
96
Driving Mode
update data
Data output Blanking
Extract positin
update data
Data output Blanking
Panasonic Semiconductor Solutions Co., Ltd.
Page
82
Data output
Data output