Panasonic MA Motion Sensor Series Specification Sheet

Ma motion sensor series

Advertisement

Quick Links

MA Motion Sensor (AMA1, AMB1, 2, 3)
N e w
Thin short type
(Mounting direction: V type)
Short type
(Mounting direction: H type)
Middle type
(Mounting direction: H type)
Long type
(Mounting direction: H type)
(Mounting direction: V type)
What is area reflective type?
The sensor emits a ray of light toward the
human body and detects the distance and
determine whether there is a person within
a given distance of the sensor. If the
sensor detects a person, it sets an output
non-contact switch to ON.
Reflected beam
Output
Non-contact
Light beam
switch
Compliance with RoHS Directive
(AREA REFLECTIVE TYPE)
FEATURES
1. Now even more miniature.
The new thin type cuts 35% from the
thickness of the previous short type.
Device installing is now easier than ever.
Existing short type
W10 × H20 × D19.5 mm
W.394 × H.787 × D.768 inch
Thin short type
W10 × H20 × D12.7 mm
W.394 × H.787 × D.500 inch
*"W" and "H" are detection value measurements.
2. Certain detection unaffected by the
reflectance of the object
The sensor can provide stable
detection that is not affected by the
condition (color or material of the
clothing) or parts (skin, hair, etc.) of the
object being monitored. (Reflectance
18% to 90%). Excellent performance
even when the detection surface is dirty.
3. Only connecting DC power supply
for operating
Built-in oscillation circuit type obviates
the hitherto existing need for start signal
input.
4. Use in adjacent positions is
Long type
possible
These sensors can be located in
adjacent positions, because the timing of
the external trigger signals can be
adjusted so that the beam frequency of
each adjacent sensor will not interfere
with the other.
5. Battery drive possible
By applying longer interval for the trigger
signal, you can reduce the total power
consumption.
6. Can be used with a number of
different supply voltages.
1) The 5V DC type (4.5 to 6.5V DC)
2) The free-ranging power type (6.5 to
27V DC)
They support the DC power supplies of
electronic products and equipment in
general.
*The thin short type is only available for 5V DC.
All Rights Reserved © COPYRIGHT Panasonic Electric Works Co., Ltd.
MOTION SENSOR
MA MOTION
SENSOR Series
7. The open collector output system
makes for easy load drive.
These sensors provide a continuous
output during detection because the
output system makes it easy to drive the
load.
They achieve an output performance of
30V, Built-in oscillation circuit type:
100 mA, External triggering type: 10 mA
(Thin short type: 100 mA). Also, the thin
short type is available in a PNP open
collector type in addition to a NPN open
collector type.
APPLICATIONS
1. Water-based product market
• Automatic lighting of wash basin units
• Toilets
• Automatic water flow from faucets
2. Stores and financial instructions
• Automatic doors
• Automatic lighting
• Cash dispensing machines
• Automatic teller machines
• Visitor detecting sensors
3. Amusement market
• Automatic lighting for game display
4. Medical field
• Non-contact switch
5. Others
• Automatic ticket gates
• Seat-taking sensors
• Detection of passengers getting on and
off a bus

Advertisement

Table of Contents
loading

Summary of Contents for Panasonic MA Motion Sensor Series

  • Page 1 They support the DC power supplies of electronic products and equipment in general. *The thin short type is only available for 5V DC. All Rights Reserved © COPYRIGHT Panasonic Electric Works Co., Ltd. MA MOTION SENSOR Series 7. The open collector output system makes for easy load drive.
  • Page 2: Ordering Information

    Note: If you plan to use multiple sensors side-by-side, or you wish to keep the current consumption small, inquire for details about external trigger type, which is suitable for such applications. All Rights Reserved © COPYRIGHT Panasonic Electric Works Co., Ltd. MA Motion Sensor (AMA1, AMB1, 2, 3)
  • Page 3 AMB340217 180 cm 70.866 inch AMB340218 190 cm 74.803 inch AMB340219 200 cm 78.740 inch AMB3402 All Rights Reserved © COPYRIGHT Panasonic Electric Works Co., Ltd. Part No. Packing quantity External triggering type Inner AMB210902 AMB210903 AMB210904 AMB210905 AMB210906 AMB210907 AMB2109 20 pcs.
  • Page 4 Indicates brightness detectible enough for sensor operation. (Measuring conditions: ambient temp.: 25°C 77°F; operating voltage: 5 V DC type 5V, Free-ranging power type 24V DC) All Rights Reserved © COPYRIGHT Panasonic Electric Works Co., Ltd. MA Motion Sensor (AMA1, AMB1, 2, 3)
  • Page 5 1575 mm 1680 mm 53.740 inch 57.874 inch 62.008 inch 66.142 inch 30,000 lx 30,000 lx All Rights Reserved © COPYRIGHT Panasonic Electric Works Co., Ltd. 8 cm 9 cm 10 cm 3.150 inch 3.543 inch 3.937 inch 72 mm...
  • Page 6: Electrical Characteristics

    Leakage current Maximum Note: * The thin short type is only available for 5V DC. All Rights Reserved © COPYRIGHT Panasonic Electric Works Co., Ltd. MA Motion Sensor (AMA1, AMB1, 2, 3) square area, square area, Notes: 1. Detecting an object within the maximum preset detection distance.
  • Page 7: Timing Chart

    (The output is latched by the previous trigger.) Power supply Output transistor (open collector) Detection Non-detection status status All Rights Reserved © COPYRIGHT Panasonic Electric Works Co., Ltd. Middle type Long type — — Note 2: *b — Note 2: *d —...
  • Page 8: How To Use

    3. To maintain the power supply noise performance, be certain to connect a capacitor (33µF or more) to the sensor power supply input terminal in order to stabilize the power supply voltage. All Rights Reserved © COPYRIGHT Panasonic Electric Works Co., Ltd. MA Motion Sensor (AMA1, AMB1, 2, 3)
  • Page 9: Reference Data

    Optical surface 31.2 1.228 23.1 .909 .016 All Rights Reserved © COPYRIGHT Panasonic Electric Works Co., Ltd. Operating area within the dotted lines Objects that enter the entire area are detected. Object Operating area within the dotted lines Note: If only part of the object is in the detection area, it is not detected.
  • Page 10: Wiring Diagram

    Lead wires AWG 28 .169 6.45 .254 *Connectors with cable for thin short type are handled as “U orders”. All Rights Reserved © COPYRIGHT Panasonic Electric Works Co., Ltd. MA Motion Sensor (AMA1, AMB1, 2, 3) Long type (V) 4.2 dia. .165 dia.
  • Page 11: Recommended Installation Procedure

    7) To protect the inner circuit, wiring should be max. 3 m 9.843 ft.. All Rights Reserved © COPYRIGHT Panasonic Electric Works Co., Ltd. 4. Recommended installation procedure Install the photoelectric sensor so that it is orientated correctly in relation to the pass directions of the target objects as shown in the figure below.

This manual is also suitable for:

Ama1Amb1Amb2Amb3

Table of Contents