Output Operation Setting Mode - Panasonic LS-400 Series Operation Manual

4-5. Output Operation Setting Mode

This mode allows the selection of output operation
from either L-ON (Light-ON), or D-ON (Dark-ON).
* Select the output 1 or output 2 beforehand.
The current
setting
The digital display will quickly
blink to confirm the setting.
Output operation
Normal mode
Output
operation
L-ON
OFF
D-ON ON
Threshold
Hysteresis mode
Output
operation
L-ON
OFF
D-ON ON
0 OFF level or
ON level
When setting rising
differential mode
Incident light
intensity
Output
operation
L-ON ON
(Detection-ON)
OFF
ON
D-ON
OFF
(Detection-OFF)
Press the
1Press the [MODE key] twice to select the 'output operation
MODE key
twice.
setting mode'.
2The current setting for output operation will be displayed.
* The factory setting is 'L-ON (Light-ON)'.
Turn the
3If the [Jog switch] is turned, the setting for output operation
Jog switch.
' side ...
('
display.
Press the
4If the [Jog switch] is pressed, output operation will quickly
Jog switch.
blink on the digital display and the selected 'output operation'
will be confirmed.
(
The digital display will not blink if the setting has not been
changed.
Press the
5Press the [MODE key] 4 times, the amplifier will return to
MODE key
4 times.
'RUN mode' (normal sensing operation).
22
Window comparator mode
Output
operation
L-ON
ON OFF
OFF D-ON
ON
Incident
9,999
light
Threshold
intensity
value
ON or OFF ON
OFF or ON OFF
ON level or 9,999
OFF level
(1_SL) (2_SL)
When setting trailing
differential mode
Incident light
intensity
Output
operation
Time
L-ON
T T
(Detection-ON)
D-ON
T T
(Detection-OFF)
' side ...
'
Ramco National
(800) 280-6933
www.panasonicsensors.com
ON OFF
OFF ON
Incident
9,999
light
Threshold
intensity
value 1 value 2
(1_SL) (2_SL)
Incident light
intensity
Time
ON
T T
OFF
ON
T T
OFF
) will blink on the digital
)