Table of Contents
Advertisement
All manuals and user guides at all-guides.com
What You Need to Begin
For Broadband Router Functions:
• PC with an Ethernet NIC installed or an 802.11b Wireless Adapter installed
• A functioning Ethernet-based cable or DSL modem OR an RS-232-based
analog or ISDN modem
• Operating system installation CD-ROM (i.e., your Windows XP CD-ROM)
• Internet Explorer 4 or later OR Netscape 4 or later
• If you have an analog or ISDN modem, an RS-232 cable
For Wireless Functions:
• 802.11b compatible Wireless PC Card, PCI Adapter, and/or USB
Adapter installed and configured
• Operating system installation CD-ROM (i.e., your Windows XP CD-ROM)
• Internet Explorer 4 or later OR Netscape 4 or later
2
4
1
3
5
Status
WAN
Power
Config
W.LAN
Front View
1. Power LED:
The green Power LED stays lighted to indicate the system is
functioning properly and flashes during the self-test phase
or firmware upgrade process.
2. Status LED:
This LED blinks to indicate normal system status.
3. Config LED:
This LED blinks to indicate that the product is being
configured or upgraded.
4. W.LAN LED:
This LED is lighted when there is a connection to the
wireless network.
The green WAN port LED flashes when the WAN port is
5. WAN LED:
sending or receiving data.
6. LAN Port LED: This green LED is always lighted when each specific
LAN port is in
use.
6
Wireless Cable/DSL Router
LAN
Link/Activity
SPEED
1
2
3
1
Advertisement
Table of Contents
