US Robotics USR8011 Quick Installation Manual

2
4
6
1 3 5
LAN
Status WAN Link/Activity
Power
Config W.LAN SPEED
1 2 3
Front View
1 2 3 4 5
RESET PRINTER COM WAN 3 2
Back View
Connecting an analog or ISDN modem to the Connecting an analog or ISDN modem to the
Wireless Cable/DSL Router Wireless Cable/DSL Router
Wireless Cable/DSL Router
6
Note: Each Wireless Access PC Card or PCI
1 12VDC
Adapter in the wireless network must have
the Infrastructure mode selected within the
Configuration Utility. Refer to your Wireless
Access PC Card or PCI Adapter documentation for
information on selecting Infrastructure mode.
Congratulations!
RESET PRINTER COM WAN 3 2 1 12VDC
Note: If your analog or ISDN modem is connected
to your PC using a USB cable, disconnect the USB
cable from both your PC and from your analog or
ISDN modem.
RESET PRINTER
The following graphic is a representation of a typical system topology after the installation of the
Wireless Cable/DSL Router.
Model-2415
Wireless Access
PCI Adapter
Wireless Access Point Router
Model-7900
COM WAN 3 2 1 12VDC
10/100 Mbps Network Card
Note: If you want to attach a printer to your network, refer to the Print Server section of the
Companion Reference Guide and the User Guide for installation instructions.
Model-2410
Wireless Access
PC Card
Cable/DSL/ISDN/
or Analog Modem
Model-8011