Flash Interval And Flash Count; Main Specifications - Olympus FP-1 Instructions Manual

Flash Interval and Flash Count

When the flash power grip is combined with the FL-50 electronic flash and HV-1 high voltage
pack, the flash interval and flash count vary as shown below.
Battery used in FP-1 Battery used in FL-50
—
AA/R6 alkaline battery
C/R14 alkaline battery
AA/R6 alkaline battery
—
C/R14 Ni-Cd battery AA/R6 alkaline battery
AA/R6 alkaline battery
Note
• Up to 10 successive full flashes are permitted. To allow the light-emitting surface to cool, the flash should not be
used for at least 10 minutes after 10m flashes have been fired.

Main Specifications

Model Number : FS-FP1
Power source : C/R14 alkaline battery x 4
Output : 6 V, 330 V
Ambient temperatures : 0°C to 40°C (operating), –20°C to +60°C (storage)
〈Grip〉
Dimensions : 55 (W) x 192 (H) x 68.5 (D) mm (2.2 x 7.6 x 2.7 in)
(excluding protrusions)
Weight : Approx. 300 g (10.6 oz) (excluding batteries)
〈Bracket〉
Dimensions : 160.5 (W) x 50 (H) x 33 (D) mm (6.3 x 2.0 x 1.3 in)
(excluding protrusions)
Weight : Approx. 185 g (6.5 oz)
Specifications are subject to change without any notice or obligation on the part of the manufacturer.
● Technical Support (USA)
24/7 online automated help: http://www.olympusamerica.com/E1
Phone customer support:Tel. 1-800-260-1625 (Toll-free)
Our phone customer support is available from 8 am to 10 pm (Monday to
Friday) ET
E-mail: e-slrpro@olympusamerica.com
● European Technical Customer Support
Please visit our homepage http://www.olympus-europa.com/
or call NUMBER: 00800-67 10 83 00 (Toll-free)
+49 (0)1805-67 10 83 or +49 (0)40-23 77 38 99 (Charged)
24
(According to the Olympus in-house testing conditions)
Battery used in HV-1 Flash interval Flash count
— Approx. 5.0 sec. Approx. 330 times
— Approx. 2.5 sec. Approx. 510 times
BN-1 Approx. 1 sec.
Approx. 780 times
— Approx. 3 sec. Approx. 120 times
— Approx. 2.5 sec. Approx. 270 times
BN-1 Approx. 1 sec. Approx. 500 times