Erasing Pictures - Olympus Camedia C-370 ZOOM Basic Manual

ERASING PICTURES

This function enables the camera to erase the recorded pictures. The "single-
frame erase" function erases only the current frame on the screen. The "all-
frame erase" function erases all frames stored in the internal memory or on
the card.
• To erase the pictures stored in the internal memory, remove the card first.
• To erase the pictures stored on the card, you should insert the card first.
• You cannot erase pictures that are protected. Cancel the protection
before erasing such pictures.
• Once erased, pictures cannot be restored. Be careful not to accidentally
Note
erase pictures you want to keep.
Single-frame erase
1
Press the power switch to turn the camera on, and press
En
.
• Playback mode is set.
• The green lamp on the camera lights.
2
Use the arrow pad to display the picture you want to
erase.
3
Press
4
Press
• The picture is erased and the menu is closed.
All-frame erase
1
In the playback mode, select [MEMORY SETUP] from the
menu, and press
• When the card is inserted, select [CARD SETUP].
2
Press
3
Press
• All the pictures are erased.
34 En
.
to select [YES], and press
.
to select [
to select [YES], and press
ALL ERASE], and press
.
.
.