VARYING THE IMAGE BRIGHTNESS
(EXPOSURE COMPENSATION)
This function allows you to make fine changes to the automatic exposure
setting. You can adjust the exposure in the range of ±2.0 in 1/3EV steps.
When the setting is changed, you can check the result on the monitor.
1
Press the power switch.
• The camera turns on in the shooting mode.
• The lens extends and the monitor turns on.
• The orange lamp lights.
2
Press
• The setting screen for the exposure compensation is displayed.
3
Press
and press
• Select a [ + ] value to brighten the image or a [
En
image.
• If not used for about 3 seconds, the camera applies the current
settings, and the setting screen disappears.
4
Take the picture.
30 En
(
).
to select the exposure compensation value,
.
] value to darken the
–