Page 1
Analog Telephone User Guide Part No. P0609347 02 February 26, 2004...
Page 2
Users must take full responsibility for their applications of any products specified in this document. The information in this document is proprietary to Nortel Networks NA Inc. Trademarks NORTEL NETWORKS is a trademark of Nortel Networks.
Switch (located under the handset). The Hook Switch must be pressed for approximately one half of one second. If your telephone does not have a • or £ button, you must use dialpad numbers. To indicate a • enter the number ⁄. To indicate a £ enter the number ‹.
Lift the handset. You will hear a stuttered dial tone when you have a message waiting. Lamp Indication The indictor lamp on your telephone lights up when you have a message waiting. Cancel MWI To turn off Stutter Dial Tone or Lamp Indication at your telephone: Press LINK £flfi...
LINK •°¤ and the extension number Camp-on Allows you to re-route a call to another telephone even if all its lines are busy. LINK •‹ Conference Allows you to establish a three-way conference between yourself, one external call and one internal call, or two internal calls.
Page 6
Make a page announcement through an external loudspeaker system. Internal and external page LINK •fl ‹ and zone (0 to 6) Make a page announcement through both your telephone speakers and an external loudspeaker system. Zone 0 pages all zones. Analog Telephone User Guide...
Page 7
LINK •¤ Ring Again Allows you to monitor a busy or unanswered telephone, or a busy line pool within your system. When the telephone or line pool becomes available, you are alerted with one short ring from your telephone.
Allows you to forward calls directly to your mailbox. Other documents Refer to the Telephone Feature User Guide for a complete list of features available for all types of telephones on your system. Note: You press the FEATURE button on digital telephones to access features. You press LINK •, FLASH •...