Table of Contents
Advertisement
64 Validate deployment
Procedure steps
Step
1
2
3
4
5
6
Validating MCC 3100 for BlackBerry communication
Use this procedure to ensure that you can connect to the MCG 3100
through the BlackBerry Enterprise Server (BES).
Procedure steps
Step
1
2
Validating MC 3100 and CS 1000 deployment
This procedure tests a number of scenarios, in increasing order of
complexity, to ensure that the configuration of the Mobile Communication
Gateway 3100 (MCG 3100), Mobile Communication Client 3100
(MCC 3100), CS 1000, and Lightweight Directory Access Protocol (LDAP)
server interact correctly.
Mobile Communication 3100 and Communication Server 1000 Solution Integration Guide
.
Action
Login to the NRS.
Select Endpoints under the Numbering Plan menu on the left
hand side.
Ensure that you are managing the Active Database.
Select the Gateway Endpoints tab.
In the results pane, locate the MCG3100 endpoint ID.
Verify that the Call Signaling IP is the IP address of the
MCG3100 gateway.
If the Call Signaling IP field shows Not Registered, then the
MCG3100 gateway is not currently registered. Check your
configuration and try again.
Action
On your BlackBerry mobile client, open the BlackBerry Mobile
browser.
Navigate to the User Portal of the MCG 3100 server.
If you can view the MCG 3100 User Portal, then you have proper
communication between the client and the MCG 3100 servers.
Nortel Mobile Communication 3100
NN49000-315 02.01
Copyright © 2008-2009 Nortel Networks. All Rights Reserved.
--End--
--End--
2 October 2009
Advertisement
Table of Contents
