Table of Contents
Advertisement
10 MC 3100 and CS 1000 deployment overview
•
•
The Direct Inward Dial (DID) number for the Dial in Service DN terminates
on the MCG 3100.
Configure the CS 1000 with a mobility prefix to support the client. The
UEXT target DN uses the mobility prefix as a prefix to identify mobile
users. The mobility prefix is a unique digit sequence that does not conflict
with the CS 1000 Universal Dialing Plan (UDP), Coordinated Dialing Plan
(CDP), and routing configuration.
The Multiple Access Directory Number (MADN) is a DN that appears
on multiple terminal numbers (TN). The Multiple Appearance Directory
Number Redirection Prime (MARP) is a designation that is put on one
of the TNs to identify that specific features apply to the DN that is on
multiple TNs should be configured for the group on the TN that is the
MARP. For more information, see Features and Services Fundamentals
(NN43001-106).
The CS 1000 NRS-SPS supports the Source Based Routing (SBR)
feature. SBR ensures that, for all users of an MCG 3100, the CLID NCOS
and dial plan they see on their mobile phone is consistent with their desk
phone. The SPS routes all MC 3100 call attempts to the user's home call
server so that those features configured on the home call server can be
applied to the MC 3100 call. For information about Source Based Routing
(SBR), see
Figure 1 "Client with CS 1000 and UDP" (page 11)
clients using a CS 1000 UDP.
Mobile Communication 3100 and Communication Server 1000 Solution Integration Guide
.
— Each user requires one Universal Extension (UEXT). Each UEXT
supports the SIP interface on the client. Configure the UEXT with
the Fixed Mobile Convergence Line (FMCL) subtype.The FMCL
subtype requires an Incremental Software Management (ISM)
independent of the Mobile Extension (MOBX) subtype.
— SIP Access Port license
SIP Gateway, operating on the VxWorks Signaling Server platform
SPS, using the NRS-SPS on the Linux-based NRS.
— Configure each MCG 3100 as a Dynamic Gateway Endpoint with
an endpoint name. Configure the Dynamic Gateway Endpoint with
authentication turned off.
— Each client requires the configuration of an NRS-SPS User
Endpoint (UE). Clients use the UE for user name and password
information, not for SIP routing. Therefore, the NRS-SPS must
never match a destination number against the client UEs (including
the corresponding UEXT Target DN).
"CS 1000 Source Based Routing" (page
Nortel Mobile Communication 3100
NN49000-315 02.01
Copyright © 2008-2009 Nortel Networks. All Rights Reserved.
13).
shows an example of
2 October 2009
Advertisement
Table of Contents
