Table of Contents
Advertisement
3 Overview
3
Overview
3.1
Brushcutter
1
2
17
3
18
19
20
30
29
28
27
26
1 Flexible shaft
Transmits engine power to cutting attach‐
ment.
2 Flexible Drive Tube
Connects coupling sleeve to powerhead and
protects the flexible shaft.
3 Filter cover
Covers the air filter.
4 Air filter
The air filter filters the air entering the engine.
5 Manual fuel pump
The manual fuel pump makes it easier to start
the engine.
6 Choke lever
The choke lever helps start the engine.
7 Shutter
The shutter is used to select summer or win‐
ter operating mode.
8 Spark plug
Ignites the fuel-air mixture in the engine.
9 Spark plug boot
Connects the ignition lead to the spark plug.
10 Cover
Covers the spark plug.
0458-840-0101-A
10
11
9
6
8
7
12
5
4
15
14
13
#
21
22
23
25
24
11 Tool bag (only FR 410)
Tools can be stored in the tool bag.
12 Carrying strap
The carrying strap distributes the weight of
the brushcutter across the body.
13 Starter grip
The starter grip is used for starting the
16
engine.
14 Fuel tank cap
The fuel tank cap closes the fuel tank.
15 Carburetor adjusting screws
For tuning the carburetor.
16 Muffler
Reduces brushcutter noise emissions.
17 Throttle cable retainer
The throttle cable retainer secures the throttle
cable in position.
18 Throttle cable
Connects the throttle trigger to the engine.
19 Throttle trigger lockout
The throttle trigger lockout unlocks the throttle
trigger.
20 Stop switch
The stop switch shuts off the engine.
21 Barrier bar
Maintains distance between operator's leg
and a metal cutting attachment.
22 Stop pin
The stop pin blocks the shaft while a cutting
attachment is being mounted.
23 Opening for stop pin
The opening for the stop pin accommodates
the stop pin.
24 Screw plug
The screw plug closes the filler opening for
STIHL gear grease.
25 Gear housing
The gear housing encloses the gearbox.
26 Shaft
The shaft connects all components.
27 Loop handle
For holding and controlling the brushcutter.
28 Throttle trigger
The throttle trigger is used to control the
engine speed.
29 Control handle
The control handle is used for operating,
holding and controlling the brushcutter.
English
3
Advertisement
Table of Contents
