Alto EZ-8 Operator's Manual page 4

Alto detail sander operator's manual 07057a 07058a 07059a 07060a
Hide thumbs Also See for EZ-8:
Table of Contents

Advertisement

DANGER:
Electrocution or injury could occur if the power cord encounters the sanding drum. Keep the
cord clear of the sanding drum. Always lift the power cord over the machine.
DANGER:
Electrocution or severe injury could occur if machine is connected to an electrical system that
is not properly grounded. Do not remove or disable grounding pin.
DANGER:
Electrocution could occur if maintenance or repairs are performed on a machine that has not
been disconnected from the power source. Always unplug machine before servicing.
WARNING:
Sanding dust can be airborne and can be breathed in while operating a sander. Always wear
a dust mask while operating sanding equipment.
WARNING:
Injury to the eyes and/or body can occur if protective clothing and/or equipment is not worn
while sanding.
performing any sanding operation.
CAUTION:
Maintenance and repairs performed by unauthorized personnel could result in damage or
injury. Maintenance and repairs performed by unauthorized personnel will void your warranty.
Servicing of this unit must always be referred to an authorized American Sanders Technology
distributor.
CAUTION:
Use of this machine to move other objects or to climb on could result in injury or damage. Do
not use this machine as a step or furniture. Do not ride on this machine.
CAUTION:
The machine is heavy. Use the proper lifting technique when transporting the machine. Get
help to lift the machine.
CAUTION:
Serious damage to the floor can occur if the machine is left running in one spot while the
sanding drum is in contact with the floor. To avoid damage to the floor, feather cut in at a normal
sanding rate. Do not dwell while lowering or raising the sanding drum. Always sand at a
constant rate.
www.ivie-ent.com
Page 4
Always wear safety goggles, protective clothing, and a dust mask while
IVIE Enterprises
Ph:(918)254-5161 or (888)262-5161 Fax:(918)250-4807
AMERICAN SANDERS TECHNOLOGY EZ - 8 Sander Operator's Manual

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents