Table of Contents
Advertisement
(1) Focus-RF system check.
Although a CD is inserted and the cover is closed,
"NO DISC" is displayed.
Push Open/Close Button without inserting a disc, and try starting
the playback operation.
1. Does the pickup move to the PICKUP-IN Switch (NSW1)
position ?
2. Does the focus (lens) move up and down ?
(Waveform drawing Figure 1)
3. Is the laser lit ?
4. Is the turntable rotating ?
When a disc is loaded, start playback operation.
1. Is focus servo activated ?
(Waveform drawing Figure 2)
2. Is the RF waveform normal ?
(Waveform drawing Figure 3)
FDO
RFOUT
TE
Yes
Yes
Yes
Yes
Figure 2
FDO
TDO
No
Sled motor (NM2).
No
Check the focus peripheral circuit.
No
Check the laser diode driver Q1 peripheral circuit.
No
Spindle motor (NM1).
No
Pins 5~9, 11, 18 and 19 on IC1
Check the laser diode driver Q1 peripheral circuit.
No
If the level is not normal.
RFOUT
7 – 2
GX-CD5100W
Figure 1
Figure 3
Advertisement
Table of Contents
