Service Repair, Maintenance And Spare Parts - Bosch Rexroth MAD100 Operating Instructions Manual

38/57
Maintenance and repair
8.2

Service repair, maintenance and spare parts

Preparing information
Bosch Rexroth AG R911336186_Edition 02
The service lives of motor components, such as seals and bearings, may
vary depending on the operating conditions, such as operation mode, speed,
vibration and shock load, and frequent reverse mode.
We recommend to change the bearing after 30,000 operating hours. Shorter
replacement intervals may be necessary; cf. checks during operation
ter 7.3 "Operation" on page
We recommend regular visual inspections on shaft sealing rings. Depending
on operating conditions, signs of wear may appear after 5,000 operating
hours. If necessary, replace the shaft sealing rings.
Wearing parts are reliably and professionally repaired and re‐
placed by the Bosch Rexroth Service in shopfloor-oriented quali‐
ty.
The Bosch Rexroth service helpdesk at our headquarters in Lohr, Germany
and our worldwide service provide You can contact us 24/7.
Helpdesk
Phone -49 (0) 9352 40 50 60
Fax +49 (0) 9352 40 49 41
Email service.svc@boschrexroth.de
https://www.boschrexroth.com
Internet
Additional information on service, repair (e.g. delivery addresses) and training
can be found on our internet sites.
For quick and efficient help, please have the following information ready:
● Detailed description of the fault and the circumstances
● Information on the rating plate of the products in question, particularly
type name and serial numbers
● Phone and fax number, your email address where we can contact you.
MAD / MAF Asynchronous Housing Motors
36).
Service-Hotline
World
Outside Germany, please contact your
local service office first.
For hotline numbers refer to the sales
office addresses on the Internet.
(chap‐