S300-DIN-S
Ground Strap
The ground strap is used to provide ground to the enclosure door.
To install the ground strap:
1. Put one ring terminal over the screw in the side panel and secure with a nut.
2. Put the other ring terminal over the screw in the enclosure door and secure
with a nut.
24-10239-359 Rev. C
This document contains confidential and proprietary information of Johnson Controls
© 2017 Johnson Controls
Mounting holes
(30cm)
12"
(30 cm)
Mounted ground strap
Hardware Installation
12"
6"
(15cm)
3