Installation; Unpacking The Equipment; Package Contents - Johnson Controls S300 Series Hardware Installation Manual

Hardware Installation
I
NSTALLATION
This section describes the hardware installation of the S300-DIN-S enclosure and its
components.

Unpacking the Equipment

Carefully inspect the shipping containers as soon as you receive them (with the
delivery agent present). Some shipping companies want to have an agent present
when a damaged container is opened. If a container is damaged, open it
immediately, inspect the contents, and have the agent make note on the shipping
document. Check the purchase order against the packing slips to ensure the order is
complete. If the contents of a container are damaged in any way, notify the carrier
and your Johnson Controls representative immediately. Report any discrepancies to
your Johnson Controls representative. Save the packing materials for possible return
shipments.

Package Contents

Backplate

Tamper switch

Lock

Ground strap kit

This document

Tools Needed
Mounting tools, such as a drill and anchors (depending on where you mount

the enclosure)
Phillips screwdriver

Small common screwdriver

Standard wiring tools

Hammer and punch

M
OUNTING
Small Enclosure (S300-DIN-S)
Four mounting holes are provided. The top and left side panel of the enclosure have
knockouts that can be used for the AC power input. Bottom panels are equipped
with knockouts for other cables.
2
This document contains confidential and proprietary information of Johnson Controls
S300-DIN-S
24-10239-359 Rev. C
© 2017 Johnson Controls