Advertisement
3.
Remove filler plug and level plug, fig 6 . Fill the
gear drive housing to the oil level plug with SAE
90 gear lubricant. Replace the plugs. Check the
level periodically especially if signs of leakage
are present.
4.
Grease the swivel casting through the grease
fitting on the casting with general purpose
grease. Add grease until it comes out under the
swivel adjustment fig 6. Re-grease every 8
HOURS of operation.
INSTALLATION
1.
Before attaching or detaching the mower,
STOP the engine, put the PTO control in the
"OUT" position.
fig 6
DRIVE UNIT
fig 7
2.
7.6, C10A, C12 TRACTORS:
The mower attaches to the front of the tractors
with 2 nuts and 2 bolts. Do not damage the
threaded studs, fig 7.
3.
RIDING TRACTORS:
The mower attaches to the Front Adapter Kit with
2 nuts and 2 bolts. Do not damage the threaded
studs, fig 8.
SAFETY
1.
REFER to the tractor Owners Manual to
familiarize yourself with all controls before
operation.
2.
DO NOT ALLOW PASSENGERS to accompany
operator at any time.
3.
DO NOT ALLOW CHILDREN to operate
equipment, nor allow adults to operate it without
proper instruction.
4.
INSPECT WORK AREA for rocks, glass, metal,
bones, and any other foreign objects. Stay alert
for holes and other hidden hazards.
5.
USE EXTREME CAUTION when operating on
slopes.
6.
REDUCE SPEED on all side slopes and sharp
turns.
7.
DO NOT OPERATE equipment except from
proper operator's position.
8.
KEEP SAFETY devices and shields in place at
all times.
5
fig 8
Advertisement
