Sony XAV-W650BT Operating Instructions Manual page 29

The sound skips during audio streaming or the
BLUETOOTH connection fails.
 Reduce the distance between the unit and the
BLUETOOTH device.
 If the BLUETOOTH device is stored in a case which
interrupts the signal, remove the case while
using the device.
 Several BLUETOOTH devices or other devices (e.g.
ham radio devices) which emit radio waves are
used nearby.
– Turn off the other devices.
– Increase the distance between the unit and
other devices.
 Playback sound stops momentarily when this
unit is connecting to a cellular phone. This is not
a malfunction.
You cannot control the connected BLUETOOTH
device during audio streaming.
 Check that the connected BLUETOOTH device
supports AVRCP.
Some functions do not work.
 Check that the connecting device supports the
functions in question.
A call is answered unintentionally.
 The connecting phone is set to start a call
automatically.
 [Auto Answer] of this unit is set to [ON] (page 16).
Pairing failed due to time out.
 Depending on the connecting device, the time
limit for pairing may be short. Try completing the
pairing within the time.
The BLUETOOTH function cannot be operated.
 Turn the ignition off. Wait for a while, then turn to
the ACC position again.
No sound is output from the car speakers during
a handsfree call.
 If the sound is output from the cellular phone, set
the cellular phone to output the sound from the
car speakers.
Siri Eyes Free is not activated.
 Perform the handsfree registration for an iPhone
that supports Siri Eyes Free.
 Set the Siri function on the iPhone to on.
 Cancel the BLUETOOTH connection with the
iPhone and the unit, and reconnect.
SongPal operation
Application name is mismatched with the actual
application in "SongPal."
 Launch the application again from the "SongPal"
application.
Error displays/messages
USB hub not supported
 USB hubs are not supported on this unit.
No Playable Data
 The disc does not contain playable data.
 The iPod has no playable data.
– Load music data/files into the iPod.
 The USB device has no playable data.
– Load music data/files into the USB device.
Cannot play this content.
 The currently selected content cannot be played
back.
– Playback content will be skipped to the next
one.
Overcurrent Caution on USB
 The USB device is overloaded.
– Disconnect the USB device, then change the
source by pressing the SOURCE button.
– Indicates that the USB device is out of order, or
an unsupported device is connected.
USB device not supported
 For details on the compatibility of your USB
device, visit the support site on the back cover.
Device no response
 The unit does not recognize the connected USB
device.
– Reconnect the USB device.
– Check that the USB device is supported by the
unit.
(underscore)
 The character cannot be displayed with the unit.
For BLUETOOTH function
Bluetooth device is not found.
 The unit cannot detect a connectable
BLUETOOTH device.
– Check the BLUETOOTH setting of the
connecting device.
 No device is in the list of registered BLUETOOTH
devices.
– Perform pairing with a BLUETOOTH device
(page 9).
Handsfree device is not available.
 A cellular phone is not connected.
– Connect a cellular phone (page 9).
29
GB