Handset Display - Motorola D1010 Series User Manual

K # / Ringer off / Pause
Press and hold to switch handset ringer on or off.
When dialling or storing a number, press and hold to enter a pause (P).
Dial a #.
L Loudspeaker key
Activate and deactivate the loudspeaker during a call.
WARNING
Handsfree activation can suddenly increase the volume in the earpiece to
a very high level. Make sure the handset is not too close to your ear.
M Intercom (at least 2 handsets needed)
In standby mode, use to make an internal call.
During a call, use to transfer an external call to another handset.

Handset display

A Display icons
On when the line is in use.
Flashes when there is an incoming call.
Flashes when you have new voicemail messages.
Off when you have no voicemail messages.
Flashes when you have missed calls and new number(s) are in the
Calls list.
Getting to know your phone
Phonebook is open.
The alarm clock has been set.
Handsfree mode.
Handset ringer is off.
Answer machine On. Off when answer machine is off. Flashes
when you have new messages. Flashes fast when the memory is
full.
Steady when the handset is registered and within range of the
base. Flashes when the handset is out of range or searching for
base.
The approximate power levels of your battery are indicated as below:
Battery is fully charged.
Battery is partially charged.
Battery is running low.
Battery is almost empty. The battery icon will flash and emit a
warning beep every minute during call.
B OK displayed
m
Press the key to select and validate a setting
C ! " displayed
u d
Press or to scroll through the options in a menu, to open the
phonebook or calls list when in standby.
D Back ! displayed
e
Press to go back to the previous menu option, to cancel an action
or to delete a character.
9