Using The Phone; Calls; Make A Call; Pre-Dial - Motorola D1010 Series User Manual

3. Using the phone

Calls

Make a call

<
1. Press .
2. Dial the telephone number.

Pre-dial

1. Enter the phone number (maximum 24 digits). If you make a mistake
e
press .
<
2. Press to dial the phone number entered.

Dial one touch numbers 1 to 9

1
1. Press and hold a key from
and dialled.
- If no number is stored, you hear a beep.

Call from the phonebook

d
1. Press . The first entry in the phonebook is displayed.
u d
2. Scroll or to the entry you want.
<
3. Press to dial the number.
TIP
Instead of scrolling to browse the phonebook entries, press the numeric
key corresponding to the first letter of the entry you wish to locate. For
2
example, pressing will show the entries starting with A. Pressing
again will show the entries starting with B, etc...

Call from the calls list

NOTE
You need to subscribe to your network's Caller Line Identification service
to be able to see the caller's number in the calls list. See "Calls list" on
page 17 for more details.
u
CALL LOG
1. Press to enter menu. You have the options to access
m
LIST ANSW MACHINE
or . Press
the call list is displayed.
u d
2. Scroll or to the entry you want.
<
3. Press to dial the number.
12
9
to until the number is displayed
CALL LIST
to enter . The first entry in

Answer a call

1. When the phone rings and
v
press to answer the call via the loudspeaker.
WARNING
When the phone is ringing, avoid holding the earpiece too close to your
ear as it may damage your hearing. Handsfree activation can suddenly
increase the volume in the earpiece to a very high level. Make sure the
handset is not too close to your ear.
NOTE
If you have subscribed to your Network's Caller Identity service and
assigned a VIP Group to the caller's number, the caller's details are
displayed before the phone starts ringing (see "Store an entry" on
page 14 and "Group melody" on page 20). You can set your phone to give
the default ringtone as soon as the call is received then once the caller's
identity is displayed, the assigned ringtone will start. See "First ring" on
page 20.
TIP
If Auto Pick up mode (see page 21) is on, simply lift up the handset from
its base to answer the call. The default setting is On.
NOTE
An incoming call has priority over other events. Whenever there is an
incoming call, other operations in progress such as phone settings, menu
2
navigation, etc. will be ended.

Adjust volume

1. During a call, press
volume.
- The level is shown in the handset display.

Mute

Mute the microphone so that you can talk to someone else in the room
without your caller hearing you.
CALL
1. During a call, press
- The microphone is muted.
e
2. Press again to turn the microphone back on.
flashes in the display, press
u d
or to adjust the earpiece or loudspeaker
e
.
<
or
Using the phone