End A Call; Switch Handset On/Off; Call A Second External Number; Intercom - Motorola D1010 Series User Manual

End a call

>
1. Press .
After you hang up, the duration the phone is off-hook is displayed for 5
seconds.
NOTE
If auto hang-up is on (see page 21) simply replace the handset on the
base to end the call. The default setting is ON.

Switch handset on/off

>
1. Press and hold until the handset switches off.
>
2. Press and hold again to switch the handset back on.

Call a second external number

Put an external caller on hold to make a second external call. You can
then switch between both callers or hold a 3-way conference call.
m
1. During your call, press
m
2. Press .
CALLING R
- Display shows
3. Enter the second number.
4. When your second caller answers, press
menu:
m
CONFERENCE
– press to initiate a 3-way with an external caller
and internal caller.
m
SWITCH CALLS
– press to switch between the two callers.
>
5. Press to hang up.

Intercom

This feature is only available when there are at least 2 registered
handsets. It allows you to make internal calls, transfer external calls from
one handset to another and use the conference option.

Call another handset

I
1. Press .
• If you have two handsets, the other handset is called automatically.
Using the phone
d
INIT 2ND CALL
. Scroll to .
m
to open the option
• If more than two handsets are registered to the base, their numbers
2345*
are displayed, e.g. . Enter the number of the handset you want to
*
call or press to ring all handsets.
>
2. Press to hang up.
NOTE
If the handset does not belong to D1000/1010 range, this function may
not be available.

Transfer an external call to another handset

1. During an external call, press
- Your caller is put on hold.
2. Enter the number of the handset you want to call or press
all handsets.
- If there are only two handsets, the other handset is called
automatically.
3. When the other handset answers, announce the caller then press
>
to transfer the call. If the other handset does not answer, press
I
to talk to your caller again.

Three-party conference call

1. During an external call, press
- Your caller is put on hold.
2. Enter the number of the handset you want to call or press
all handsets.
- If there are only two handsets, the other handset is called
automatically.
3. When the other handset answers, announce the call then press and
I
hold to connect both calls. If the other handset does not
I
answer, press to talk to your caller again.
>
4. Press to hang up.

Voicemail

If you have subscribed to your network's voicemail service (if available),
your D1011 displays when you have a new message. Depending on
your country and network services, the voicemail number may be pre-
stored in your handset for one touch dialling using the
I
.
*
I
.
*
1
button.
to ring
to ring
13