Connecting The Box - Mitsubishi LVP-XD10U Operating Manual

Connecting the Box

Please follow the instructions here to place the AV box:
Figure 27 Bottom View of AV box
To attach the AV box to the unit
Figure 29 Connecting the Box
Figure 28 Side View of AV box
1. Precisely place the two chocks at the
lower surface of the AV box into the
lower slots in the correspondent position
in the projector.
2. Slowly push the box to fit the unit and,
meanwhile, insert the box plug into the
A/V connector closely.
3. Plug in the correct cord into the
correspondent jack or port to perform A/
V function.
4. Select inputs by pressing "Source"
key.
25
English