C Troubleshooting - Mitsubishi LVP-XD10U Operating Manual

C Troubleshooting
PROBLEMS
NO POWER
NO PICTURE
IMAGE ISN'T
SQUARE ON THE
SCREEN
POOR COLOR
IMAGE IS BLURRED
REMOTE CONTROL
DOESN'T WORK
NO SOUND
22 English
TRY THESE SOLUTIONS
Plug the power cord into the AC Inlet.
Plug the power cord into the power Inlet.
Wait two minutes after the projector has been turned off
before turning the projector back on.
Check that you have selected the proper input source.
Ensure all cables are connected properly.
Adjust the brightness and contrast.
Remove the lens cap.
Is the POWER indictor flashing?
Is the STATUS Indicator flashing?
Reposition the unit to improve its angle on the screen.
Is the vertical offset properly corrected using the keystone
function?
Select the correct video system.
Adjust brightness, contrast, or saturation.
Adjust the focus.
Reposition the unit to improve its screen angle.
Ensure the distance between the unit and screen is within
the adjustment range of the lens.
Replace the batteries with new ones.
Make sure there is no obstacle between the remote control
and the unit.
Stand within 10 meters (32 feet) of the unit.
Make sure nothing is blocking the receiver on the control
pad.
Check audio cable connection from audio input source.
Adjust audio source.
Press "Volume" (+) button.
Press "Mute" button.