Related Manuals for Bosch WGG04408NL
Summary of Contents for Bosch WGG04408NL
- Page 1 Translated from Dutch to English - www.onlinedoctranslator.com Washing machine WGG04408NL [NL] User manual and installation instructions...
-
Page 2: Table Of Contents
Refer to the Digital User's Guide for more information. Index 1 Safety..........4 7 Display ........21 1.1 General instructions ....4 8 Buttons ........24 1.2 Destination of the device rate ........4 9 Programs ........ 26 1.3 Restriction of users ..4 10 Accessories........ - Page 3 16 Cleaning and maintenance ..34 16.1 Cleaning the drum ....34 16.2 Cleaning the detergent drawer ........ 35 16.3 Cleaning the drain pump....35 17 Troubleshooting ....39 17.1 Emergency release....48 18 Transporting, Storing and drain........48 18.1 Disassembling the device ....48 18.2 Installing transport locks ........
-
Page 4: Safety
NLSafety 1 Safety Observe the following safety instructions. 1.1 General instructions †Please read this manual carefully. †Keep the operating instructions and product information for future reference. for use or for subsequent owners. †Do not connect the device in case of transport damage. 1.2 Destination of the device Only use the device: †to wash machine-safe textiles and wool by hand... -
Page 5: Safe Installation
SafetyNL 1.4 Secure installation Observe the safety regulations when installing the device. WARNING ‒ Risk of electric shock! Improper installations are dangerous. ▶ Connect and operate the device only in accordance with the information on the type plate. ▶ Only connect the device to a mains supply with alternating current via a properly installed earthing socket. - Page 6 NLSafety ▶ If the power cord is too short, contact customer service. ▶ Only use adapters approved by the manufacturer. WARNING ‒ Risk of injury! The heavy weight of the device can cause injuries when lifted. ▶ Do not lift the device alone. If this appliance is installed incorrectly in a washer-dryer column, the installed appliance may fall.
-
Page 7: Safer Use
SafetyNL If the appliance is moved by protruding parts, such as the loading door, the parts can break off. ▶ Do not move the appliance by protruding parts. CAUTION ‒ Risk of cutting! Sharp edges on the device can cause cuts if touched. ▶... - Page 8 NLSafety ▶ In the case of discarded appliances, remove the mains plug from the socket, then cut the mains cable and damage the lock of the appliance door so that the appliance door no longer closes. WARNING ‒ Risk of suffocation! Children can inhale or swallow small parts and choke.
-
Page 9: Safe Cleaning And Maintenance
SafetyNL CAUTION ‒ Risk of burns! The soap gets hot when washing at high temperatures. ▶ Do not touch the hot soapy water. CAUTION ‒ Risk of chemical burns! When opening the detergent drawer, detergent and care products may splash out of the appliance. - Page 10 NLSafety WARNING ‒ Risk of poisoning! Toxic fumes can be generated when cleaning agents containing solvents are used. ▶ Do not use solvent-based cleaning agents.
-
Page 11: Avoiding Material Damage
Avoid material damageNL Make sure that the internal ▶ 2 Material damage diameter of the water tap is at least avoid 17 mm. Make sure that the thread length ▶ on the connection to the water Follow this instruction to avoid tap is at least 10 mm. -
Page 12: Environmental Protection And Saving
NLEnvironmental protection and saving Clean the device only with water ▶ Reduce washing temperature for and a soft, damp cloth. lightly and normally soiled laundry. aAt low temperatures, it consumes Remove all detergent residues, ▶ device less energy. For light to spray mist or residues immediately normal soiling, lower upon contact with the appliance. -
Page 13: Set Up And Connection
Set up and connectNL Remark:The device has been checked 4 Set up and connect at the factory for correct operation. Water stains may remain in the device. The stains disappear after the 4.1 Unpacking device first wash. PAY ATTENTION! Objects that remain in the drum and The delivery consists of: †... -
Page 14: Removing Transport Locks
NLSet up and connect Transport the device upright. Pull the hoses out of the holders. ▶ installation site Requirements The device with Plinth locking lips → Page 30 confirm. Place the device Floor with wooden guess at a beams resistant Loosen and remove all bolts of the 4 wooden plate (thick- transport locks with a SW13 open-... -
Page 15: Connecting The Device
Set up and connectNL Remove the 4 sleeves. 4.5 Connecting the device Connect water supply hose WARNING Risk of electric shock! The device contains live parts. Touching live parts is dangerous. Do not immerse the electric ▶ Aquastop valve in water. Connect the water inlet hose to the tap (26.4 mm = 3/4"). -
Page 16: Adjusting The Device
NLSet up and connect To adjust the appliance, turn the The connection position appliance feet. Check the horizontal tie with a adjustment of the appliance with a hose clamp spirit level. (24-40 mm) bore gene. the water washbasin feeding hose with a bend →... - Page 17 Set up and connectNL Insert the mains plug of the mains cable of the device into a socket in the vicinity of the device. The connection data of the device can be found in the technical data → Page 51 † Check the mains plug for tightness.
-
Page 18: Getting To Know Your Device
NLGetting to know your device 5 Getting to know your device 5.1 Device Here you will find an overview of the components of your device. Depending on the device type, details in the picture may differ, e.g. the color and o m. the V and pump Transport protections... -
Page 19: Detergent Drawer
Getting to know your deviceNL 5.2 Detergent drawer Dosing aid for liquid detergent → †Insert the dosing aid for liquid detergent", Page 32 Detergent dispenser II: †Detergent for the main used to be, †softener †Bleach †Stain salt Compartment : †fabric softener †Liquid starch †Impregnation agent Detergent dispenser I:... -
Page 20: Before Using For The First Time
usage Fill powder detergent into 6 Before first use compartment II. B prepare the device for use use. 6.1 Starting a wash cycle without laundry Your device has been thoroughly checked before leaving the factory. To remove any residual water, wash without any laundry the first time. -
Page 21: Display
DisplayNL 7 Display The display shows the current setting values, options or information texts. Example display indication name More information Indication 0:40 Approximate expected program duration Program duration / remaining time of or time remaining in the program. the program →... - Page 22 NLDisplay name More information Indication Program status To wash To rinse Program status Centrifuge Program status Program end Program status Child lock †lights up: the childproof lock is activated. † flashes: the child lock is activated and the device was operated. →...
- Page 23 DisplayNL name More information Indication Door †lights up: the door is locked and can not be opened. †flashes: the door is not closed. †off: the door is unlocked and can be den open. Crane †No water pressure. †The water pressure is too low. E:35 / -10 Error code, error indication, signal.
- Page 24 NLTests 8 Keys The selection of the program settings depends on the program set. You can see the selection options for each program in the overview for → †Programs", Page 26 † Knob Choise More information Start/Reload †start Start, cancel or pause program. †Cancel †pause †activate...
- Page 25 TestsNL Knob Choise More information The laundry is so damp after washing that it hangs out well on the clothesline.
-
Page 26: Programs
NLPrograms 9 Programs Remark:The care labels on the laundry give you additional information on program selection. max. Program Description bela- thing (kg) Cotton Wash hard-wearing fabrics made of cotton, linen and blended fabrics. Also suitable as a shortened program for normally soiled laundry if you activate Speed Perfect. - Page 27 ProgramsNL max. Program Description bela- thing (kg) Program setting: †max. 90 °C †max. 1400 rpm Wash textiles made of synthetic and blended fabrics. wrinkle recovery loin Program setting: †max. 60 °C †max. 1200 rpm Fast mix Wash textiles made of cotton, linen, synthetic materials and blended fabrics.
- Page 28 NLPrograms max. Program Description bela- thing (kg) Hygiene Plus Wash hard-wearing fabrics made of cotton, linen and blended fabrics. Suitable for allergy sufferers and with high hygiene requirements. Remark:When the set temperature is reached, it remains constant throughout the washing process. Program setting: †max.
- Page 29 ProgramsNL max. Program Description bela- thing (kg) Remark:If you have not used a program with a temperature of 60 °C or higher for a long time, the drum cleaning indicator flashes as a reminder. Wash cotton, synthetic and blended fabrics. Super Short 15/30 min.
-
Page 30: Accessories
QR code in the table of contents or on hooks and eyes – Tie fabric belts, apron straps, etc. www.bosch-home.com. together, or use a laundry bag 11.1 Preparing the laundry – Tie together long drawstrings and... -
Page 31: Detergent And Care Ginger
– do not rub in fresh stains, but instructions by scanning the QR code dab off with soapy water in the table of contents or on – Unfold and loosen the laundry or www.bosch-home.com. observe the program descriptions 13.1 Switch on device Required:The device is correctly set up and connected. -
Page 32: Detergent
NLService Required:The laundry is prepared. 13.6 Using the dosing aid for → †Laundry", Page 30 liquid detergent Open the door. know Make sure the drum is empty. You can use a dosing aid in the detergent drawer to dose liquid Place the laundry in the drum. -
Page 33: Starting The Program
ServiceNL †Keep the directions for washing 13.10 Program Cancel agent and laundry care agent → Page 31 at. onStart/Reloadto press. Open the appliance door. Pull out the detergent drawer. At high temperature and high Fill with detergent. → water level, the appliance door †Detergent drawer", Page 19 remains locked for safety reasons. -
Page 34: Child Lock
Remark:More information can be found in the digital operating instructions by scanning the QR code in the table of contents or on www.bosch-home.com. 16 Cleaning and care loves Leave the appliance door and detergent drawer open to allow the residual Carefully clean and maintain your device water to dry out. -
Page 35: Cleaning The Detergent Drawer
Cleaning and maintenanceNL 16.2 Cleaning the detergent Place the insert and click into place. drawer Pull out the detergent drawer. Press the insert down and remove the detergent drawer. Clean the opening for the detergent drawer. Pull out the insert from bottom to top. - Page 36 NLCleaning and maintenance Open and remove the service door. CAUTION - Risk of burns!The soap gets hot when washing at high temperatures. ▶ Do not touch the hot soapy water. Pull off the sealing cap to allow the wash water to flow into the collection container.
- Page 37 Cleaning and maintenanceNL Install the pump cover. Cleaning the drain pump Check that the pump cover † Required:The drain pump is empty. → Page 35 components are correctly assembled. As there may still be residual water in the pump, carefully unscrew the lid.
- Page 38 NLCleaning and maintenance Before the next wash To prevent unused detergent from flowing into the drain during the next wash, run the programmeDrainoff after you have emptied the pump. Open the tap. Plug in the mains plug. Switch on the device. Pour one liter of water into compartment II.
-
Page 39: Troubleshooting
TroubleshootingNL 17 Troubleshooting You can remedy minor faults on the device yourself. Before contacting customer service, please refer to the troubleshooting information. This way you avoid unnecessary costs. WARNING Risk of electric shock! Improper repairs are dangerous. Only qualified personnel may carry out repairs on the device. ▶... - Page 40 NLTroubleshooting Cause and Troubleshooting Malfunction "E:30 / -80" Remove unauthorized extensions from the water ▶ drain hose. → †Connecting the device", page 15 Pump cover is not fully screwed in. Make sure that the pump cover is screwed into the ▶...
- Page 41 TroubleshootingNL Cause and Troubleshooting Malfunction "E:35 / -10" Close the tap. ▶ Please contact customer service. ▶ → †Customer Service", page 49 flashes. The Voltage Control System detects an impermissible voltage drop. No solution possible. ▶ Remark:When the supply voltage has stabilized, the program continues normally.
- Page 42 NLTroubleshooting Cause and Troubleshooting Malfunction Device not working. Mains plug of the power cable is not plugged in. Connect the appliance to the mains. ▶ The fuse in the fuse box has tripped. Check the fuse in the meter box. ▶...
- Page 43 TroubleshootingNL Cause and Troubleshooting Malfunction Make sure that the drain pipe and the water Washing water is not ▶ pumped out. drain hose are not kinked or pinched. Drain pump is clogged. → †Cleaning the drain pump", page 35 ▶ Water drain hose is connected too high.
- Page 44 NLTroubleshooting Cause and Troubleshooting Malfunction Start several times The imbalance control system eliminates the imbalance by distributing the laundry several times. with centrifugation. No error - no action required. ▶ Remark:When loading, place large and small items of laundry together in the drum. Different sized laundry is more evenly distributed during the spin cycle.
- Page 45 TroubleshootingNL Cause and Troubleshooting Malfunction Load recognition is active. Drum is spinning, er no water flows into No error, no action necessary. ▶ the appliance. Remark:The load detection can take up to 2 minutes. strong foam Detergent dosage is too high. ming.
- Page 46 NLTroubleshooting Cause and Troubleshooting Malfunction fizzing, hissing Water is flushed into the detergent drawer under pressure. loud. No error - normal operating noise. ▶ Loud noise during The appliance is not leveled properly. → †Adjusting the device", Page 16 spin. ▶...
- Page 47 TroubleshootingNL Cause and Troubleshooting Malfunction Spin result is The unbalance detection system has interrupted the not to satisfaction- spin cycle due to uneven distribution of the laundry. ness. The laundry is too wet / too damp. Redistribute the laundry in the drum. ▶...
-
Page 48: Emergency Release
→ †Set up and connection", Remark:More information can be found page 13 and → clue in the digital usage by †Before using for the first time", scanning v in the table and the QR code Page 20 † of contents or on www.bosch-home.co... -
Page 49: Disposal Of Your Old Appliance
customer serviceNL 18.4 Disposal of your old chemical equipment (waste electrical and electronic appliance equipment - WEEE). Environmentally friendly disposal The Directive sets the means that valuable raw materials can framework for the take- be reused. back valid in the EU and processing of old appliances. -
Page 50: Product Number (E No.) And Production Number (Fd)
NLcustomer service Check for defective supply lines or 19.1 Product number (E-No.) and fittings up to the AquaStop production number connection on the tap. (FD) †While using an appliance In principle, with AquaStop you do The product number (E-Nr.) and the not have to keep up with it or. -
Page 51: Consumption Values
Consumption valuesNL 20 Consumption values The following information is provided in accordance with the EU Ecodesign Regulation. The specified values for other programs asEco 40-60are only guide values and have been determined in accordance with the applicable standard EN60456. Pro- Program bela- Water-... - Page 52 NLTechnical data Recorded Ver- †Off state: 0.15W to be allowed to †non-disabled caved in position: 0.50 W †At least: water pressure 100 kPa (1 bar) †Maximum: 1000 kPa (10 bar) Length of the 150 cm water supply feeding hose Length of the 150 cm water drain hose Length of the...
- Page 56 Contact data of all countries are listed in the attached service directory. BSH Hausgeräte GmbH Carl-Wery-Strasse 34 81739 Munich, GERMANY www.bosch-home.com A Bosch Company * 9001728611* 9001728611†020228)