Table of Contents
Advertisement
4. Installation Menu
ITEM
SETTING
TEST PATTERN
SIGNAL SETTING
TRACKING
FINE SYNC.
H.POSITION *
V.POSITION *
COMPONENT
AUTO
RGB
YCbCr
YPbPr
ASPECT
STANDARD
16:9
ZOOM1/2/3
REAL
MIRROR
FLOOR FRONT
CEILING FRONT
FLOOR REAR
CEILING REAR
KEYSTONE
H.KEYSTONE
V.KEYSTONE
LANGUAGE
9 languages
EXPAND
• SIGNAL SETTING Menu is not displayed when DVI-D is selected as the input source.
• Though horizontal strips may appear on the enlarged projected image, such symptom is not a malfunction.
• Options marked with * become unavailable depending on the type of the input signal.
• When you change the horizontal or vertical position to a large extent, noise may appear.
• The adjustable range of the vertical position varies depending on the type of the input signal. Though the
image may stay in the same position even when the setting value is changed, such symptom is not a
malfunction.
FUNCTION
The test pattern for focus adjustment is displayed when the ENTER button
is pressed.
Use to adjust the image supplied from the computer.
Use to eliminate vertical wide stripes, if appears, viewing the projected
image.
Use to eliminate flickering or blur, if appears, viewing the projected image.
Use to adjust the horizontal position of the projected image.
Use to adjust the vertical position of the projected image.
Select this option in normal use. Input signals are automatically
recognized.
Select this option when connecting the projector to high definition video
equipment having R, G, and B output terminals.
Select this option when connecting the projector to a DVD player or other
device having Y, C
, and C
B
Select this option when connecting the projector to a MUSE recorder or
other device having Y, P
Select to change the aspect ratio automatically depending on the input
signal.
Select to project images with an aspect ratio of 16:9.
Select to enlarge and project images of CinemaScope size, Vista size, or
European Vista size.
Select to project images in their original size as input.
Select when viewing images from the front with the projector installed on
the floor.
Select when viewing images from the front with the projector installed on
the ceiling.
Select when viewing images projected from the behind of the screen with
the projector installed on the floor.
Select when viewing images projected from the behind of the screen with
the projector installed on the ceiling.
Use to correct horizontal keystone distortion.
Use to correct vertical keystone distortion.
Use to select the language used in the menus.
Use to enlarge the projected image. (You cannot change the display position
after enlargement.)
component video output terminals.
R
, and P
component video output terminals.
B
R
EN-25
Advertisement
Table of Contents
