1.7
Unpacking
After you unpack the box you should have all of the items
indicated in Figure 1. Save the box and packing materials
in case you transport the monitor. Complete and mail in
warranty cards.
2
1
5
4
Figure 1
1. Color Monitor
2. AC Power Cord
3. Signal Cable SC-B104
1.8
Tilt/Swivel Base
The monitor comes with a tilt/swivel base. This enables you
to position the monitor at the best angle and tilt for
maximum viewing comfort.
Screen Position Adjustment
Adjust the tilt and rotation of the monitor by placing your
hands at opposite sides of the case. You can adjust the
monitor 90 degrees right or left, 15 degrees up or 5 degrees
down, as shown below.
Figure 2
CAUTION
Keep your fingers away from the pivot area of the tilt/swivel
base.
3
6
4. User's Guide
(this document)
5. Warranty-Card
6. Questionnaire-Card
- 8 -
1.9 Quick Operation Chart
To summarize the steps in connecting your computer
with the color monitor and setting the necessary controls
and switches, refer to the chart below.
Connect the color monitor and computer with
the necessary cords and cables.
See
Section 3. INSTALLATION AND CONNECTION
Turn on the color monitor.
Turn on the computer.
Set the controls.
See
Section 4. OSD(On Screen
Display) FUNCTIONS
OK
OK
See Section 5. TROUBLESHOOTING
Call for your authorized MITSUBISHI
Product Support.
If a problem appears.
If the problem persists.